MHJ10-S-2,5-MF (565513) solenoid valve

OT-FESTO027773

{{ $t('shop.display.artikel.link_zur_artikelgruppe') }}
Voorbeeldig Afbeelding: MHJ10-S-2,5-HF (567502) & MHJ10-S-2,5-HF/LP (567796) & MHJ10-S-2,5-LF (572080) & ...
Stk
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Valve function 2/2 closed monostable
Actuation type Electrical
Build.width [mm] 10
Normal nominal flow [l/min] 100
Operating pressure [bar] 0.5 to 6
Construction set up Poppet valve without reset spring
Reset mode Pneumatic spring
Protection category IP65
Pitch dimension [mm] 10,5
Information about operation Power supply must be able to deliver at least 1.7 A without a voltage breakthrough,
Do not operate without flow,
For block assembly with flow max. ambient temperature 45 °C.
Sealing principle Hard
installation position arbitrary
Hand assist actuation none
Control type Direct
Flow direction Not reversible
b-value 0.38
C-value [l/sbar] 0,40
Max. switching frequency [Hz] 1.000
Shifting time on at 4 bar and 24 V in new condition [ms] 0,8
Shifting time off at 4 bar and 24 V in new condition [ms] 0,4
Shifting time on at 0.5 bar and 24 V in new condition [ms] 0,8
Shifting time off at 0.5 bar and 24 V in new condition [ms] 0,5
Shifting time on at 6 bar and 24 V in new condition [ms] 0,9
Shifting time off at 6 bar and 24 V in new condition [ms] 0,4
Tolerance shifting time off +15 %/-25 %
Tolerance shifting time on ±15 %
Operating voltage range DC [V] 21.6 to 26.4
Power-on time 100 %
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation not possible
Limits ambient and media temperature Depending on the switching frequency
Corrosion resistant class KBK 2 - moderate corrosion stress
Bearing temperature [°C] -20 to 50
Permitted surface temperature magnet [°C] 120
Medium temperature [°C] -5 to 60
ambient temperature [°C] -5 to 60
Max. tightening torque Valve fastening [Nm] 0,70
Product weight [g] 75
Electrical connection 3-wire,
cable
Fastening type on connection plate
Pneumatic connection 1 Connection plate
Pneumatic connection 2 Connection plate
Material information RoHs compliant
Seals material HNBR
Housing material PA reinforced,
PPS reinforced
Screws material Steel
KC-mark KC-EMV
CE certificate (see declaration of conformity) to EU EMC directive
Reverse polarity protection for operating voltage
Additional functions Spark suppression,
Holding current reduction with energy recovery,
Protection switch off
Eingangswiderstand [kOhm] 34
Coil characteristic value 24 V DC: Low current phase 2 W, high current phase 7 W
Trigger signal range DC [V] 3 to 30
Information about incoming current 0,09 - 0,44 mA bei einem Triggersignal von 3 - 15 V,
0,44 - 15,44 mA bei einem Triggersignal von 15 - 30 V,
Anstieg linear
Permitted voltage oscillations ± 10 %
Cable length [MTR] 2,50
Cable sleeve material PUR
OT-FESTO027773
{{ $t('shop.all.gewicht') }} 75 g / Stk
{{ $t('shop.display.artikel.zollwarennummer') }} 84812090
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Er is een fout opgetreden!

Er is een fout opgetreden, laad de pagina opnieuw en probeer het nogmaals.