{{ $t('shop.all.spaetbestellservice.hinweis') }}
Valve function | 2/2 closed monostable |
Actuation type | Electrical |
Build.width [mm] | 9 |
Normal nominal flow [l/min] | 160 |
Operating pressure [bar] | 0.5 to 6 |
Construction set up | Poppet valve without reset spring |
Reset mode | Pneumatic spring |
Protection category | IP40 |
Pitch dimension [mm] | 9,5 |
Information about operation | Do not operate without flow |
Sealing principle | Hard |
installation position | arbitrary |
Hand assist actuation | none |
Control type | Direct |
Flow direction | Not reversible |
b-value | 0.36 |
C-value [l/sbar] | 0,66 |
Max. switching frequency [Hz] | 500 |
Shifting time on at 4 bar and 24 V in new condition [ms] | 1,0 |
Shifting time off at 4 bar and 24 V in new condition [ms] | 0,5 |
Shifting time on at 4 bar and 48 V in new condition [ms] | 0,8 |
Shifting time off at 4 bar and 48 V in new condition [ms] | 0,4 |
Shifting time on at 4 bar and 12 V in new condition [ms] | 1,4 |
Shifting time off at 4 bar and 12 V in new condition [ms] | 0,6 |
Shifting time on at 0.5 bar and 24 V in new condition [ms] | 0,9 |
Shifting time off at 0.5 bar and 24 V in new condition [ms] | 0,7 |
Shifting time on at 6 bar and 24 V in new condition [ms] | 1,3 |
Shifting time off at 6 bar and 24 V in new condition [ms] | 0,5 |
Tolerance shifting time off | +15 %/-25 % |
Tolerance shifting time on | ±15 % |
Operating voltage range DC [V] | 12 to 53 |
Information about operating voltage | Only with MHJ9-KMH-... line. |
Coil resistance [Ohm] | 5,0 |
Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
Information about operating and control medium | Oiled operation not possible |
Limits ambient and media temperature | Depending on the switching frequency |
Corrosion resistant class KBK | 2 - moderate corrosion stress |
Bearing temperature [°C] | -20 to 50 |
Permitted surface temperature magnet [°C] | 120 |
Medium temperature [°C] | -5 to 60 |
ambient temperature [°C] | -5 to 60 |
Product weight [g] | 30 |
Electrical connection |
2 pin, Plug KMH |
Fastening type |
pipe installation, With throughway bores, Selectively: |
Pneumatic connection 1 | QS-6 |
Pneumatic connection 2 | QS-6 |
Material information | RoHs compliant |
Seals material | HNBR |
Housing material | PA reinforced |
Screws material | Steel |
Operating conditions according to DIN/VDI 0580 |
S3 15% 20 min. for block mounting, S3 50% 20 min. for single valve |
{{ $t('shop.all.gewicht') }} | 30 g / Stk |
{{ $t('shop.display.artikel.zollwarennummer') }} | 84812090 |
{{ $t('shop.all.hersteller') }} | Festo |
{{ $t('shop.all.spaetbestellservice.hinweis') }}
{{ $t('shop.all.wochenendversand.hinweis') }}
Er is een fout opgetreden, laad de pagina opnieuw en probeer het nogmaals.