MHJ9-QS-6-HF/LP (567793) solenoid valve

OT-FESTO034964

Voorbeeldig Afbeelding: MHJ9-QS-4-MF (553118)   &   MHJ9-QS-6-HF (567790)   &   MHJ9-QS-4-LF (572079)  & ...
Stk
{{ $t('shop.display.artikel.hinweis_alternative') }}
{{ $t('shop.display.artikel.eigenschaften_headline') }}
Valve function 2/2 closed monostable
Actuation type Electrical
Build.width [mm] 9
Normal nominal flow [l/min] 160
Operating pressure [bar] 0.5 to 4
Construction set up Poppet valve without reset spring
Reset mode Pneumatic spring
Protection category IP40
Pitch dimension [mm] 9,5
Information about operation Do not operate without flow,
For block assembly with flow max. ambient temperature 45 °C.
Sealing principle Hard
installation position arbitrary
Hand assist actuation none
Control type Direct
Flow direction Not reversible
b-value 0.36
C-value [l/sbar] 0,66
Max. switching frequency [Hz] 500
Shifting time on at 4 bar and 24 V in new condition [ms] 1,0
Shifting time off at 4 bar and 24 V in new condition [ms] 0,4
Shifting time on at 4 bar and 48 V in new condition [ms] 0,8
Shifting time off at 4 bar and 48 V in new condition [ms] 0,4
Shifting time on at 4 bar and 12 V in new condition [ms] 1,3
Shifting time off at 4 bar and 12 V in new condition [ms] 0,5
Shifting time on at 0.5 bar and 24 V in new condition [ms] 0,8
Shifting time off at 0.5 bar and 24 V in new condition [ms] 0,5
Tolerance shifting time off +15 %/-25 %
Tolerance shifting time on ±15 %
Operating voltage range DC [V] 12 to 53
Power-on time 100 %
Information about operating voltage Only with MHJ9-KMH-... line.
Coil resistance [Ohm] 2,5
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Information about operating and control medium Oiled operation not possible
Limits ambient and media temperature Depending on the switching frequency
Corrosion resistant class KBK 2 - moderate corrosion stress
Bearing temperature [°C] -20 to 50
Permitted surface temperature magnet [°C] 120
Medium temperature [°C] -5 to 60
ambient temperature [°C] -5 to 60
Product weight [g] 30
Electrical connection 2 pin,
Plug KMH
Fastening type pipe installation,
With throughway bores,
Selectively:
Pneumatic connection 1 QS-6
Pneumatic connection 2 QS-6
Material information RoHs compliant
Seals material HNBR
Housing material PA reinforced
Screws material Steel
OT-FESTO034964
{{ $t('shop.all.gewicht') }} 30 g / Stk
{{ $t('shop.display.artikel.zollwarennummer') }} 84812090
{{ $t('shop.all.hersteller') }} Festo
{{ $t('shop.all.dokumente') }}

 
{{ $t('shop.all.unverbindliche_richtwerte') }}
{{ $t('shop.all.spaetbestellservice') }}
{{ countdownAsString }} {{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.spaetbestellservice.hinweis') }}

{{ $t('shop.all.wochenendversand') }}
{{ $t('shop.modules.navi.fruehbucher-spaetbestellhinweis.noch') }} {{ countdownAsString }}

{{ $t('shop.all.wochenendversand.hinweis') }}

Er is een fout opgetreden!

Er is een fout opgetreden, laad de pagina opnieuw en probeer het nogmaals.